Product Code: SYT-200 Infusion pump
Compatible with IV sets of any brand with high accuracy.
Automatically calibration for IV sets of any brand.
Three working modes: Drop counting control,Rate control and Time control mode.
8 Hours internal battery life in high capacity.
Have a unique color LCD and an internal battery with a high capability.
Switch between ml/h and drops/min freely.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function： When finish the total volume of an infusion, the pump will alarm and enter KVO state.
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV sets)
≤25drop/min: ±2%, >25drop/min:±3% (With the drop counting control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1.0ml/h～1200ml/h (1.0ml/h～99.9ml/h, 0.1ml/h step; >99.9ml/h, 1ml/h step)
Delivery Time Range: 1min～1999min (1 min step)
Volume Limit Range: 0～9999ml (1 ml step)
Total Volume Range: 1～9999ml (1 ml step)
Rapid injection: 600ml/h
When the delivery rate≤10ml/h, KVO is 1 ml/h. Ot herwise KVO is 3ml/h.
Air-in-line, Infusion complete when limited volume has been set, Empty container, Occlusion, Door is open, waiting time Over, No drop been detected, Operational errors, Low battery, other device failures.
AC power supply: AC 100 to 240V±10%，50/60Hz；
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous operation on a new fully charged battery with the rate of 20 drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃ Relative humidity: 10 to 90%
Accessories: AC power line, Operational manual