Product Code:  K300

Needle Destroyer  Scope of application:
Many pipe type plastic tools for medical treatment such as one-off injector, one-off injection acus, one-off scurf acus, one-off transfusion (blood) set etc.
Product function: this machine can quick melt down acus head; lacerate the ampoule of injector and rubber stopper with simple and convenient operation.
Method of use:
1. Put the tri-core electric source into the socket of AC220V; open the switch at behind and the indicator light of electric source turns into red.
2 . The injector with pinhead can plug into the right cutting room to press the injector, push forward; after the pinhead melt, it will hear the sound of the machine working; at this time, the indicator light will be green, push it continually, finish cutting, melting and then recall; last it should be damaged by damage-shape machine.
3 . Scurf acus and other steel acus can plug into the front melt entrance with melting; when operating, it should rotate the pinhead lightly to melt quickly.

Technical Parameter:
Working Electric Current: AC220V　50Hz
Power Consume: 80VA
External Dimension: 200×160×130（mm）
Weight: 3kg

work with low electric voltage to melt the needle instantly,double over-heated protection is provided.
Surplus liquid in the needle will be vaporized to avoid pollution.
Nearly no spark ejects during operation, the whole process lasts for 1-3 seconds.
Specification:

Power Supply: AC 110V±10% / 220V±10%
Working voltage: AC 6.5V / 12A
Working Noise: :≤50 dB
Power: :≤130VA
Overheating protection temperature: 95℃

AC/DC; low voltage electric shock can melt the needle instantly; mechanic cutting can melt
syringe body, double superheating protection is provided;
Surplus liquid in the syringe can be boiled off instantly and no pollution;
There will some electrical spark which is normal during melting;
Indicator light sparks during melting, showing the needle is under destroying, the whole process is finished in 1 to 3 seconds.

Specifications:
Power: AC 110V±10%/220V±10%; DC 6V
Melting method: melt with low pressure, high temperature; mechanic cutting of the body
Melting efficiency: take 20ml syringe body as reference, can melt syringe (ø1.2mm length 35mm) approximately 3 seconds; destroy the body within 4 seconds;
Working time: can destroyer around 240 continuously (take 20ml syringe body as reference)
Working noise:≤50 decibel
Electrode chip working voltage: AC 8V
Power: ≤130VA
Electrode chip superheating protection temperature: 85℃

Features:
AC; low voltage electric shock can melt the needle instantly; mechanic cutting can melt syringe body, double superheating protection is provided;
Surplus liquid in the syringe can be boiled off instantly and no pollution;
There will some electrical spark which is normal during melting;
Indicator light sparks during melting, showing the needle is under destroying, the whole process is finished in 1 to 3 seconds.

Specifications:
Power: AC 110V±10%/220V±10%
Melting method: melt with low pressure, high temperature; mechanic cutting of the body
Melting efficiency: take 20ml syringe body as reference, can melt syringe (ø1.2mm length 35mm) approximately 3 seconds; destroy the body within 4 seconds;
Working time: can destroyer around 240 continuously (take 20ml syringe body as reference)
Working noise:≤50 decibel
Electrode chip working voltage: AC 8V
Power: ≤130VA
Electrode chip superheating protection temperature：85℃

Destroy disposable syringe to reject cross infection completely While melting the needle,
insert the needle into the melting hole, and then press down the syringe gently when the
needle touches the electrodes inside.

While the needle is being melted, there will be spark and the NEEDLE indicator will be
flashing for about three seconds, which is a normal phenomena;
It has the overheat protection function to protect machine work normally while melting the needle;Ozone disinfection function and alarm function when the drawer is full of residue;
The residual liquid in the needle will be vaporized instantly during melting, The “working indicator”
is flashed when melting the needle, which means the needle is being melted and the whole process
lasts 1-3 seconds;
While cutting the head of the syringe body, insert the syringe into the hole and pull the handle
to cut it off.
The whole process lasts 3 seconds.
Dealing with the waste residue:
There is a taphole at the bottom, under which there is a rubbish drawer to collect waste residue.
Please clean the rubbish drawer after using some time (usually after melting 50pcs of syringes).
Press the drawer gently at the bottom, which will flick automatically, then clean out the waste
residueand install again.
　

This device is mainly designed for destroying the insulin needle as well as acupuncture needle and other micro-needles, taking only 1-2 seconds to melt needle easily .

Specifications:
-Easy to operate
-For home use only