|
|
Product Code:
SYT-A6 Ambulatory PCA
Infusion Pump
Ideal solution for
infusion treatment for home care and hospital use such as:
Antibiotics, Epidural,
Post-operative pain management,
Pulmonary arterial hypertension (PAH/Flolan)
Flow rate option: 1,
2, 3, 4, 6, 8, 10 ml/h
Precision: ±10 %
P.C.A. Function (Patient-Controlled Analgesia):Adding ¼ of
preset dosage by PCA button without interruption of current
infusion.
Min. 30 minutes interval for safety protection.
Dimensions:140 (L) x 95 (W) x 35 (D) mm / 5.12” (L) x 3.74” (W)
x 1.38” (D)
Weight:200 g / 0,44 lb (1 engine with 1 empty 100 ml) reservoir)
Carton content:
50 x Reservoirs (100 ml or 260 ml)
1 x pump (free with 50 reservoirs)
1 x Carrying bag |
|
Product Code:
SYT-A Volumetric Infusion Pump |
|
Product Code:
SYT-A8 Volumetric Infusion
Pump, Dual infusion mode, Adjustable Occlusion,Adjustagble
Bolus, Multi-language |
|
Product Code:
SYT-200 Infusion pump
Compatible with IV sets
of any brand with high accuracy.
Automatically calibration for IV sets of any brand.
Three working modes: Drop counting control,Rate control and
Time control mode.
8 Hours internal battery life in high capacity.
Have a unique color LCD and an internal battery with a high
capability.
Switch between ml/h and drops/min freely.
Three levels of alarm volume: high, medium and low.
Three levels of occlusion pressure: high, medium and low.
KVO function: When finish the total volume of an infusion,
the pump will alarm and enter KVO state.
SPECIFICATIONS
Controls:
Drop counting and adjusting the delivery rate automatically
Pump Type: Peristaltic finger
Applicable IV Sets:
Compatible with IV sets of any standard(including lucifugal IV
sets)
Accuracy:
≤25drop/min: ±2%, >25drop/min:±3% (With the drop counting
control mode)
±5% (With the rate control mode after the correct calibration)
Delivery Rate Range:
1~400drop/min(1drop/min step)
1.0ml/h~1200ml/h (1.0ml/h~99.9ml/h, 0.1ml/h step; >99.9ml/h,
1ml/h step)
Delivery Time Range: 1min~1999min (1 min step)
Volume Limit Range: 0~9999ml (1 ml step)
Total Volume Range: 1~9999ml (1 ml step)
Rapid injection:
600ml/h
KVO Rate:
When the delivery rate≤10ml/h, KVO is 1 ml/h. Ot herwise KVO is
3ml/h.
Alarms:
Air-in-line, Infusion complete when limited volume has been set,
Empty container, Occlusion, Door is open, waiting time Over, No
drop been detected, Operational errors, Low battery, other
device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%,50/60Hz;
Internal LI Battery: 11.1V, 2000mAh. 8 Hours of continous
operation on a new fully charged battery with the rate of 20
drops/min.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 130mm(L)× 200mm(W) × 230mm(H)
Net Weight: Approximately. 2.5kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative
humidity: 20 to 90%
Storage Conditions: Ambient temperature: -10 to 55℃ Relative
humidity: 10 to 90%
Accessories: AC power line, Operational manual |
|
Product Code:
SYT-S601 Infusion pump
● Flow rate range from
1-600ml/h.
● Unique door-free structure and big LCD screen,making it easier
and more convenient to operate and in the meanwhile
avoiding problems of pump
stuck and fluid leakage.
● Unique function of bedside infusion supervision,
making patients and their relatives more assured while
also reducing nurses' workload. If used with 2000I and 900I,
a bed No.can be set in the machine and then its infusion
progress and alarm information can be
displayed on 2000I(Infusion Supervision System )located at
Nurse's Station and on 900I(Nurse
Beeper).The nurse, upon seeing and hearing the signal, can go
and handle the unit accordingly.
● All brands of standard IV sets are compatible. With only a
simple calibration, it can guarantee an accurate, smooth and
safe infusion.
● When detecting air in line or occlusion, an audio and visual
alarm signal shall be given instantly while at
the same time the machine stops operation automatically, thus
reducing the danger of air embolism to patients.
● The infrared sensor shall give alarm signal when detecting
excessive air pressure.
● Application of double CPU, making the infusion process safer
and more reliable.
● Alarm signals are given in case of malfunction or operation
error and the machine stops operation
automatically.
Product Code:
|
SYT-S601 |
|
Max.size of outer shell |
120*140*190 mm(length*width*height) |
Bolus |
600ml/h |
Alarm functions |
Over,OCCL.,AIR,low battery, control
abnormal, no AC power supply, installation error. |
Flow rate range |
1-600ml/h |
Displayed information |
Rate, volume limit, accumulated
volume, power indicator light, bed No.,AIR,OCCL.,OVER. |
Volume limit |
1-9999ml |
Max.weight |
<2.0kg |
Accuracy |
±5% |
Classification |
Type
Ⅱ,BF |
KVO flow rate |
1ml/h,keep vein open(KV))rate |
Outer shell material |
ABS plastic |
Max.power
consumption |
25W,can run for more than 5 hours
continuously after being fully recharged. |
Operating conditions
|
Environment temperature +5℃~+40℃
,atmosphere pressure 86~106kPa, relative humidity20%~90% |
Power supply |
AC100-240V,50/60 Hz,25VA |
Storage and transport conditions
|
Environment temperature -15 ℃~+50℃
,atmosphere pressure 86~106kPa, relative
humidity20%~90%. |
Battery |
Rechargeable lithium polymer
battery,7.4V,1650mAh |
Applicable infusion set
|
All standard infusion sets. |
Certification |
CE0197 |
EMC |
Comply with EN60601-1-2 |
Work mode |
Continuous work mode
|
Fuse |
220V 2A*2, 12V 2A*2 |
Water proof |
IP21 |
Electrical Shock Proof |
Battery:Class
Ⅱ:AC
Power:Type BF. |
Battery recharge |
When the pump is connected to the AC
power supply, turn on the power and the battery will
automatically recharge (about 8-14 hours to recharge
fully). |
Applied standards |
Comply with standard of EN ISO
14971:2000,IEC 60601-1:1995,EN IEC 60601-1-2:2001,IEC
60601-2-24,EN ISO 14155-1:2003,EN 980:2003,EN
1041:1998,MDD 93/42EEC |
|
|
Product Code:
SYT-S601B Infusion pump
● Flow rate range from
1-2000ml/h.
● Unique door-free structure and big LCD screen, making it
easier and more convenient to operate and in the meanwhile
avoiding problems of pump stuck
and fluid leakage.
● Unique function of bedside infusion supervision, making
patients and their relatives more assured while also reducing
nurses' workload. If used with 2000II and 900I, a bed No. can be
set in the machine and then its infusion status and alarm
information can be displayed on 2000II (Infusion Supervision
System ) located at Nurse's Station and on 900I (Nurse
Beeper).The nurse, upon seeing and hearing the signal, can go
and
handle the unit accordingly.
● All brands of standard IV sets are compatible. With only a
simple calibration, it can guarantee an accurate, smooth and
safe infusion.
● When detecting air in line or occlusion, an audio and visual
alarm signal shall be given instantly while at the same time the
machine stops operation automatically, thus reducing the danger
of air embolism to patients.
● The infrared sensor shall give alarm signal when detecting
excessive air pressure.
● Application of double CPU, making the infusion process safer
and more reliable.
● Alarm signals are given in case of malfunction or operation
error and the machine stops operation automatically.
Product Code:
|
SYT-S601B |
|
Max.size of
outer shell |
120*140*190
mm(length*width*height) |
Bolus |
2000ml/h |
Alarm
functions |
Over,OCCL.,AIR,low battery, control abnormal, no AC
power supply, installation error. |
Flow rate
range |
1-2000ml/h |
Displayed
information |
Rate, volume
limit, accumulated volume, power indicator light, bed
No.,AIR,OCCL.,OVER. |
Volume limit |
1-9999ml |
Max.weight |
<2.0kg |
Accuracy |
±3% |
Classification |
Type
Ⅱ,BF |
KVO flow
rate |
1ml/h,keep
vein open(KV))rate |
Outer shell
material |
ABS plastic |
Max.power
consumption |
25W,can run
for more than 5 hours continuously after being fully
recharged. |
Operating
conditions |
Environment
temperature +5℃~+40℃
,atmosphere pressure 86~106kPa, relative humidity20%~90% |
Power supply
|
AC100-240V,50/60 Hz,25VA |
Storage and
transport conditions |
Environment
temperature -15 ℃~+50℃ ,atmosphere pressure 86~106kPa,
relative humidity20%~90%. |
Battery
|
Rechargeable
lithium polymer battery,7.4V,1650mAh |
Applicable
infusion set |
All standard
infusion sets. |
Certification |
CE0197 |
EMC |
Comply with
EN60601-1-2 |
Work mode
|
Continuous
work mode |
Fuse |
220V 2A*2,
12V 2A*2 |
Water proof |
IP21 |
Electrical
Shock Proof |
Battery:Class
Ⅱ:AC Power:Type BF. |
Battery
recharge |
When the
pump is connected to the AC power supply, turn on the
power and the battery will automatically recharge (about
8-14 hours to recharge fully). |
Applied
standards |
Comply with
standard of EN ISO 14971:2000,IEC 60601-1:1995,EN IEC
60601-1-2:2001,IEC 60601-2-24,EN ISO 14155-1:2003,EN
980:2003,EN 1041:1998,MDD 93/42EEC |
|
|
Product Code:
SYT-602
Infusion pump
Three kinds of modes: Rate Mode, Time Mode, Body Weight Mode.
Unique door free structure: Avoiding problems of pump stuck
and fluid leakage.
Double CPU: Making the process of infusion safer and more
reliable.
Accurate Injection: Precise control of the infusion rate and
infusion volume.
Flow rate range: 1.0 ml/h-2000.0 ml/h.
Driven by step motor: No pulsating wave will be educed even
during low-rate
injection.
Alarm is given in the following situations: Infusion
Completion, Occlusion,
Low Battery, Air Bubble, Installation Error, Malfunction or
Operation Error.
IV Set: All brands of standard IV sets are compatible.
KVO rate can be selectable according to concrete requirements
from 1.0 ml/h to 5.0 ml/h.
Wireless Module Control: When used with SK-2000I or SK-900I,
the infusion information will be transferred to the Infusion
Supervision System in order to ensure the patients’ safety.
Big Color LCD.
Dimension |
120×140×190 mm |
|
Accumulated infusion volume |
1.0~9999.0
ml |
Maximum
weight |
2.0 kg |
Infusion
accuracy |
±3% |
Displayed information |
RATE
VOL.LIMIT
∑(
accumulated infusion volume)
Battery
charge indicator
AC power
indicator
Over
OCCL.
AIR
BED No. |
Alarm
function |
Over
OCCL.
Low
battery
IV line
installation error
AIR
EMPTY
Machine
malfunction |
Fuse |
T 2AL
250V~ |
KVO rate |
1.0
ml/h-5.0 ml/h |
Maximum
power consumption |
25VA,
running more than 4 hours after being charged |
Selectable modes |
Rate
mode, Time mode, Weight mode |
Infusion
rate range |
1.0-2000
ml/h |
Rate
mode |
1.0~2000.0
ml/h |
Bolus |
Rate:≤1000.0 ml/h
Bolus:
1000.0 ml/h |
Time
mode |
Volume
limit: 0.1~999.9ml
Time: 1~2000
minutes |
Operation conditions |
Environment
temperature 5℃~40℃,
air pressure 86kPa~106kPa,
relative humidity ≤80% |
Body
Weight mode |
Drug
limit: 1.0~999.9
mg, Volume limit: 0.1~999.9
ml. Weight: 0.1~300.0
kg, Dose: 0.1~9999.9
Selectable unit: mg/kg/h, ug/kg/min |
Electrical Safety |
Comply
with EN60601-1 for medical equipment and
EN60601-2-24 |
Battery |
Rechargeable lithium polymer battery, 7.4V, 1600 mA |
Applicable infusion sets |
All
standard IV sets |
Storage |
Environment temperature-20~55℃,
air pressure 50~106kPa,
relative humidity ≤95% |
|
|
Product Code:
SYT-603
Infusion pump
1. Four kinds of modes: Rate
mode, Time mode, Body Weight mode, Drop Counter mode.
2. High-definition Large-screen color LCD, English language
interface, making it more easier to operate.
3. Double CPU makes the process of infusion safer and more
reliable.
4. Widely application scope of infusion rate, 1ml/h ~2000ml/h.
5. Drop Counter inspection and automatic control, automatic
conversion between ml/hour and drop/minute, one-touch switch
display.
6. Display of the drug names.
7. With data lock to prevent accidental modification of infusion
parameters.
8. Display battery capacity.
9. Up and Down pressure sensors prevent free flow.
10. All standard brands of infusion pipes are applicable, press
buttons for selection to achieve accurate, smooth and safe
infusion. |
Syringe Pump (12 models) |
|
Product Code:
SYT-A3 Micro-Infusion Syringe
Pump Main features:
• Wide flow rate range from 0.1 ml/h to 1500 ml/h
• Accepts syringe sizes from 10 ml - 100 ml
• Automatic accuracy calibration
• Adjustable occlusion pressure
Infusion rate range |
10 ml syringe
-------------------> 0.1-300 ml/h |
50/60 ml syringe
-------------------> 0.1-1200 ml/h |
20/30 ml syringe
---------------> 0.1-500 ml/h |
100 ml syringe
----------------------> 0.1-1500 ml/h |
Bolus / Purge rate |
10 ml syringe
-------------------> 240 ml/h |
50/60 ml syringe
--------------------> 960 ml/h |
20/30 ml syringe
---------------> 400 ml/h |
100 ml syringe
-----------------------> 1200 ml/h |
Bolus volume |
Programmable from 1 to 10
ml |
Flow rate increments |
0.1-99 ml/h at 0.1 ml/h
increments |
100-1500 ml/h at 1ml/h
increments |
Accuracy |
± 5% with syringe |
Occlusion pressure |
0.04 Mpa – 0.12 Mpa / 5.8
PSI – 17.4 PSI |
Alarm volume |
High, Medium, Low |
Safety protection |
Automatic keypad lock |
Audible & visual alarms |
Alarms |
NEAR EMPTY (syringe
almost empty) |
Syringe disengaged |
COMPLETE (Infusion
completed) |
Mechanical error |
OCCLUSION |
Power source change |
LOW BATT |
|
Power supply |
AC 100-240V 50/60 Hz; DC
12V |
Battery |
Built-in rechargeable
sealed NiMH |
Pump will operate 3 hours
min. at 25 ml/h with fully charged battery |
Net weight |
1.85 Kg / 4 lbs |
Dimensions |
335 (L) x 142 (W) x 120
(H) mm / 13” (L) x 51½, ” (W) x 3 ½“ (H) |
|
|
Product Code:
SYT-A5 Portable PCA Syringe Pump
Great for home care or ambulatory
treatment with low rate small volume such as:
• Thalassemia
• Neonatal care
• Immunity deficiency (globulin)
• Parkinson (Apokinon) etc.
Syringe Size |
1 ml - 20 ml single-use
syringe |
Infusion Rate |
1 mm/hr - 99 mm/hr |
Alarms |
Battery depleted,
mechanical error, occlusion, syringe disengaged,
completion |
Alerts |
Battery low, syringe not
loaded, near end |
PCA Bolus |
Maximum setting of bolus
is 1/4 of the syringe size |
OLED Display |
Syringe size; rate is set
by mm/hr and displayed in ml./hr simultaneously; alarm
messages |
“LOW BATT” LED indicator |
On when battery is low or
depleted |
Dimension |
166 (L) x 60 (B) x 30 (H)
mm |
Weight |
≤
180g (battery weight not included) |
Maximum infusion pressure |
≤
0.12MPa(with
10 ml syringe) |
Occlusion alarm pressure |
0.12MPa(with
10 ml syringe) |
|
|
Product Code:
SYT-A7
Syringe Pump
Main features:
• 100 ml syringe pump capability
• Can load 20 ml, 50 ml and 100 ml disposable syringes
• Convenient time settings
• Automatic calculation of the flo w rate based on de fault time
settings
Power supply |
AC 220/240V 50Hz (AC
150/135V 60Hz available if required) |
Power consumption |
Less than 6VA |
Applicable syringes |
20ml, 30ml, 50ml, 60ml,
100ml disposable syringes; Compatible with major brand
syringes |
Time settings |
4min, 8min, 12min, 16min,
20min |
Infusion accuracy |
± 20 sec |
Flow rate |
60ml/h - 1500ml/h |
Automatic calculation of
the delivery rate based on time pre-selection |
Alarms |
NEAR END |
Audible |
COMPLETE |
Visual |
OCCLUSION |
|
LOW BAT |
|
Battery operations |
Continuouse operation of
15 pieces of 50ml syringe at 12 minutes setting with
built-in rechargeable |
Ni-MH battery |
Included accesories |
Standard power cable |
Dimensions |
115 (D) x 366 (W) x 120
(H) mm / 4.53” (L) x 14.41, ” (W) x 4.72“ (H) |
Net weight |
1.8kg / 3.96lbs |
|
|
Product Code:
SYT-180 Syringe pump
*Compatible with syringes of any
brand.
*Automatically calibration for syringes of any brand .
*Three working modes: Rate control mode,Time control mode and
Dose-Weight control mode.
*Automatically detection of syringe types and settings.
*Wide range in delivery rate settings.
*8 Hours internal battery life in high capacity.
*Three levels of alarm volume: high, medium and low.
*Three levels of occlusion pressure: high, medium and low.
*KVO function:After infusion is complete, the pump automatically
switches to the smallest flow to prevent creating the thrombus.
SPECIFICATIONS
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml)
and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after
calibration )
Delivery Rate Range:
50ml(60ml):0.1ml/h~1800.0ml/h (0.1ml/h step)
20ml(30ml):0.1ml/h~800.0ml/h (0.1ml/h step)
10ml:0.1ml/h~400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume:0.1~999.9ml (0.1ml step)
TIME:1~1999min (1min step)
Body Weight Mode Range:
Volume:0.1~999.9ml(0.1ml step)
DRUG MASS:0.1~999.9mg(0.1mg step)
DOSE:0.01~99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT:0.1~300kg(0.1kg the least step)
Volume Limit Range: 0~1999.9ml (0.1 ml step)
Total Volume Range: 0.1~1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml):1800.0ml/h, 20ml(30ml):800.0ml/h,
10ml:400.0ml/h
KVO Rate: 1ml/h
Alarms:
Near empty, Syringe empty, Volume complete (a volume limit has
been set ), Occlusion, Syringe loose, Operation error, Low
battery and other device failures.
Power Supply:
AC power supply: AC 100 to 240V±10%,50/60Hz;
Internal Lithium Battery: 11.1V, 2000mAh. Approximately 8 hours
of continuous operation on a new and fully charged battery
running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative
humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃ Relative
humidity: 10 to 90%
Accessories: AC power line, Operational manual |
|
Product Code:
SYT-180D, Double channel
syringe pump
*Automatically detection of syringe types and settings.
*Broad range in delivery rate settings.
*8 Hours internal battery life in high capacity.
*Three levels of alarm volume: high, medium and low.
*Three levels of occlusion pressure: high, medium and low.
*KVO function:After infusion is complete, the pump automatically
switches to the smallest flow to prevent creating the thrombus.
CHARACTERISTIC
Compatible Syringe: Any standard syringe with 10ml、20ml(30ml)
and 50ml(60ml)
Accuracy: ±2% ( Any manufacturers of syringes, right after
calibration )Delivery Rate Range:
50ml(60ml):0.1ml/h~1800.0ml/h (0.1ml/h step)
20ml(30ml):0.1ml/h~800.0ml/h (0.1ml/h step)
10ml:0.1ml/h~400.0ml/h (0.1ml/h step)
Time Mode Range:
Volume:0.1~999.9ml (0.1ml step)
TIME:1~1999min (1min step)
Body Weight Mode Range:
Volume:0.1~999.9ml(0.1ml step)
DRUG MASS:0.1~999.9mg(0.1mg step)
DOSE:0.01~99.99ug/kg/min(0.01ug/kg/min step)
WEIGHT:0.1~300kg(0.1kg the least step)
Volume Limit Range: 0~1999.9ml (0.1 ml step)
Total Volume Range: 0.1~1999.9ml (0.1 ml step)
Rapid injection: 50ml(60ml):1800.0ml/h, 20ml(30ml):800.0ml/h,
10ml:400.0ml/h
KVO Rate: 1ml/h
Alarms: Near empty, Syringe empty, Volume complete(a volume
limit has been set ), Occlusion, Syringe loose, Operation error,
Low battery and other device failures.
Power Supply: AC power supply: AC 100 to 240V±10%,50/60Hz;
Internal Lithium Battery: 11.1V, 2000mAh. Approximately 8 hours
of continuous operation on a new and fully charged battery
running at 5ml/h.
Power Consumption: ≤25VA
Safety level: ClassⅠ, Type CF
Dimensions: 280mm(L)×160mm(W)×130mm(H)
Net Weight: Approximately. 3.0kg
Operating Conditions: Ambient temperature: 5 to 40℃ Relative
humidity: 20 to 90%
Storage Condition: Ambient temperature: -10 to 55℃ Relative
humidity: 10 to 90%
Accessories: AC power line, Operational manual |
|
Product Code:
SYT-S501
syringe pump
● All standard syringes of 10ml,
20ml, 50ml are compatible.
The machine diagnoses the syringe size automatically, and
with a simple syringe specification setting, the syringe pump
can guarantee an accurate and safe injection.
● Unique function of bedside injection supervision which makes
patients and their relatives as well as nurses more assured.
● Excellent injection function and operation. Even small-volume
injection is accurate.
● Double CPU system ensures safe and reliable injection process.
● Driven by precision step motor, no pulsating waves shall occur
during even low-rate injection.
● Accurate and sensitive pressure sensor detects occlusion
pressure accurately.
● Alarms are given in case of malfunction or operation error and
the machine stops operation automatically.
Dimension |
288*130*122mm |
|
Maximum
weight |
<3.0kg |
Fuse |
220V2A*2,
12V2A*2
|
Maximum
Power consumption |
25VA,running
more than 5h after being fully charged. |
Power
supply(city electricity) |
50/60HZ
AC100V~240V |
Injection
increment
|
0.1ml/h |
Size of
Syringes |
10ml,20ml,50ml |
Injection
accuracy |
±3% |
Feasible
injection rate range |
10ml:0.1~100ml/h
20ml:0.1~200ml/h
50ml:0.1~500ml/h
|
Bolus |
The fastest
rate of the size of syringe in use |
Electrical
safety |
Comply with
the requirement of GB9706.1-1995,EN60601-1 and UL60601-1 |
Displayed
information |
Rate,
accumulated injection volume, Syringe size Battery
capacity, Bed No.,Ac power indicator, Battery charge
indicator |
EMC
(Electromagnetic compatibility) |
Comply with
the requirement EN60601-1-1,EN60601-2-24 |
Operating
conditions: |
Environment
temperature 5~45℃.air pressure 70~106kPa, relative
humidity30%~90% |
Alarm
functions |
Near,
Over,OCCL.,low battery, syringe installation error,
control abnormal, machine malfunction |
Accumulated
injection volume |
0~999.9ml |
|
Product Code:
SYT-501A
syringe pump
1、All standard syringes of 10ml,
20ml, 50ml(SYT-S501), 1ml, 5ml,10m(SYT-501A) are compatible. The
machine diagnoses the syringe size automatically, and with a
simple syringe specification setting, the syringe pump can
guarantee an accurate and safe injection.
2、Unique function of bedside injection supervision which makes
patients and their relatives as well as nurses more assured.
3、Excellent injection function and operation. Even small-volume
injection is accurate.
4、Double CPU system ensures safe and reliable injection process.
5、Driven by precision step motor, no pulsating waves shall occur
during even low-rate injection.
6、Accurate and sensitive pressure sensor detects occlusion
pressure accurately.
7、Alarms are given in case of malfunction or operation error and
the machine stops operation automatically. |
|
Product Code:
SYT-502
syringe pump
Three kinds of modes: Rate
Mode, Time Mode, Body Weight Mode.
Double CPU, making the process of injection safer and more
reliable.
Accurate and sensitive pressure sensor detecting occlusion
pressure accurately.
Injection time, dose, solution can be checked during the
process of injection.
Precision step motor. There is no pulsating wave even during
low-rate injection.
KVO rate can be selectable according to concrete requirements
from 0.1ml/h to 5ml/h.
Excellent injection operation. The accuracy will be ensured
even at small-volume injection.
Unique injection supervision system ensures the safe injection
and reduces the nurse’s workload.
Accept all standard syringes of 5ml, 10ml, 20ml, 30ml and
50ml. It will self-diagnose and display the syringe size and set
parameter automatically in the form of menu.
Alarm is given when there is malfunction or operation error,
and the machine stops running automatically.
Save the preset volume automatically when there is
unpredictable switch off, ensuring the accuracy of injection
volume
Applicable
syringes |
All brands
of standard syringes: 5ml,10ml,20ml,30ml,50ml |
|
Weight |
<3.0kg |
|
Accuracy |
±2% |
Dimension
|
380×190×180mm |
|
Injection
increment |
0.1ml |
Power supply |
AC100~240V, 50/60Hz |
|
Occlusion
value |
40kPa~160kPa |
Fuse
|
T2AL250V~ |
|
Injection
rate |
5ml: 0.1
ml/h -100ml/h 30ml: 0.1 ml/h -600ml/h
10ml: 0.1
ml/h -200ml/h 50ml: 0.1 ml/h -1500ml/h
20ml: 0.1
ml/h -400ml/h |
Maximum
power consumption |
25W,
can run for 4h after being recharged |
|
Battery
|
Rechargeable
lithium polymer battery, 7.4V, 1600mAh |
|
Accumulated
injection volume |
0.1ml~9999.9ml |
Battery
recharge |
When the pump is connected to the AC power supply, turn
on the power and the battery will automatically recharge
(about 8~14 hours to recharge fully.) |
|
Modes of
operation |
Selectable:
Rate mode, Time mode, Body Weight mode |
|
Time mode |
Volume
limit: 0.1~999.9ml Time:
1~2000 minutes |
|
Electrical
safety
|
Comply with the stipulation of IEC60601-1: 1996 |
|
Body weight
mode |
Drug
limit:0.1~999.9mg, Solution limit:0.1~999.9ml, Weight:
01~300.0kg, Dose: 0.1~9999.9 mg/kg/h, ug/kg/min |
|
Electromagnetic compatibility |
Comply with the stipulation of IEC60601-1-2: 2006 |
|
Displayed
information |
Rate, volume
limit, accumulated injection volume, syringe size,
pressure value, battery capacity, unit of medical
dosage, bed No., AC power indicator, battery charge
indicator, drug name, bolus
rate |
Shell
material |
ABS plastic |
|
Classification |
II Class-BF |
|
Alarm
function |
OVER, NEAR,
Occlusion, Low battery, Syringe disengaged, No AC power
supply, serious low battery |
Operating
conditions |
Environment temperature 5°C ~40°C, air pressure 80kPa
~106kPa, relative humidity
≤80% |
|
Storage
conditions |
Environment temperature -40°C~55°C, air pressure 50kPa
~106kPa, relative humidity
≤95% |
|
KVO rate |
0.1ml/h-5.0ml/h (selectable) |
Applied
standards |
IEC60601-1: 2005
IEC60601-2-24: 1998
IEC60601-1-2: 2006
ISO780-1997
ISO15223: 2000
ISO7886-1: 1993
ISO / IEC:
Guide No. 37《Consumer
Goods Usage Instructions》 |
|
Bolus rate |
5ml: 100ml/h
10ml:
200ml/h
20ml:
400ml/h
30ml:
400ml/h-600ml/h
50ml:
400ml/h-1500ml/h |
|
|
|
Product Code:
SYT-503
syringe pump
● Double-channels(multi-channels),
sub-rate injection.
● Four kinds of injection modes: Rate mode, Time mode, Body
Weight mode,
link mode.
● Innovative design of outer appearance gives a strong sense of
science and
technology.
● Double CPU makes the process of injection safer and more
reliable.
● The use of TFT color LCD makes the screen display more
remarkable.
● Digital menu, easy operation; functions fully meet the
clinical demand.
● Integrative pump device makes more smooth operation and easier
installation and maintenance.
● Brand-new STM32 ARM-Cortex M3 platform, optimized circuit
design, operation rate
more faster and stable.
● Ample and user-friendly indicator information; accurate and
complete alarm
information to ensure safe injection.
● Unique wireless infusion supervision function, achieving
accurate infusion and synchronization infusion supervision to
patients.
Max.
injection rate |
1500ml/h(Different
injectors have different maximum rate.)
|
Accumulated
volume |
0.1ml~999.9ml |
Max. size
of outer shell |
320 mm×200 mm×110 mm(length×width×height) |
Injection
accuracy |
±3%
( up to +1% after
calibration.) |
Applicable
injectors |
5, 10, 20, 30, 50ml |
Injection
increment |
0.1ml/h |
Battery |
AC 100~240V,50/60Hz |
Volume
limit |
0.1ml~999.9ml |
Battery
recharge |
Rechargeable Lithium Polymer battery,
7.4V, 1600mA |
Classification |
ClassⅡ,
Type BF |
Max. power
consumption |
Single-channel works for continuous 5 hours at the rate
of 25ml/h after fully recharged; double-channels works
for continuous 3 hours at the rate of 25ml/h after fully
recharged. |
Range of
flow rate |
5ml injector:
0.1ml/h~100ml/h
10ml injector:0.1ml/h~200ml/h
20ml injector:0.1ml/h~400ml/h
30ml injector:0.1ml/h~600ml/h
50ml injector:0.1ml/h~1500ml/h
|
Bolus rate |
5ml
injector:
100ml/h 10ml
injector:200ml/h
20ml
injector:400ml/h
30ml injector:400~600ml/h
(adjustable)
50ml injector:400~1500ml/h(adjustable) |
Alarm
information |
Near completion, completion, OCCL., injector off, low
voltage, No AC Power supply, communication error, link
abnormal, pump stuck, reading error of the parameters,
etc. |
Mode
selection |
1. Rate mode 2. Time mode 3. Body Weight mode 4.
Link mode |
Rate mode |
Rate:0.1ml/h~1500.0ml/h(Max.
value depends on injector specification) |
Time mode |
Volume:0.1ml~999.9ml
Time:1min.~2000
min. |
Body Weight
mode |
Weight:0.1kg~300.0kg
drug:0.1mg~999.9mg
volume:0.1ml~999.9ml
dose:0.1~1500.0
(restricted to unit, drug,
solution, weight and injector)
Unit:mg/kg/h,
ug/kg/min |
OCCL. value |
40Kpa~160Kpa,display
the voltage status and the pressure value. |
KVO rate |
Adjustable
range:0.1ml/h~5.0ml/h(adjustable:
0.1ml/h per each segment,press
“0” to cancel KVO function.) |
|
|
Product Code:
SYT-503A
syringe pump
Four Channels Syringe Pump
Features and Functions:
1. Four Channels, sub-rate injection.
2. Four kinds of injection modes: Rate mode, Time mode,Body
Weight mode, link mode.
3. Innovative design of outer appearance gives a strong sense of
science and technology.
4. Double CPU makes the process of injection safer and more
reliable.
5. Brand-new STM32 ARM-Cortex M3 platform, optimized circuit
design, operation rate more faster and stable.
6. The use of TFT color LCD makes the screen display more
remarkable.
7. Digital menu, easy operation; functions fully meet the
clinical demand.
8. Ample and user-friendly indicator information; accurate and
complete alarm information to ensure safe injection.
9 Aluminum alloy base, integrative pump device makes more smooth
operation and easier installation and maintenance. |
|
Product Code:
SYT-503B
syringe pump Six
Channels Syringe Pump
Features and Functions:
1. Six Channels, sub-rate injection.
2. Four kinds of injection modes: Rate mode, Time mode,Body
Weight mode, link mode.
3. Innovative design of outer appearance gives a strong sense of
science and technology.
4. Double CPU makes the process of injection safer and more
reliable.
5. Brand-new STM32 ARM-Cortex M3 platform, optimized circuit
design, operation rate more faster and stable.
6. The use of TFT color LCD makes the screen display more
remarkable.
7. Digital menu, easy operation; functions fully meet the
clinical demand.
8. Ample and user-friendly indicator information; accurate and
complete alarm information to ensure safe injection.
9 Aluminum alloy base, integrative pump device makes more smooth
operation and easier installation and maintenance. |
|
Product Code:
SYT-503C
syringe pump
Multi-Channels Syringe Pump
Features and Functions:
1. Multi-channels(Eight-channels), sub-rate injection.
2. Four kinds of injection modes: Rate mode, Time mode,Body
Weight mode, link mode.
3. Innovative design of outer appearance gives a strong sense of
science and technology.
4. Double CPU makes the process of injection safer and more
reliable.
5. Brand-new STM32 ARM-Cortex M3 platform, optimized circuit
design, operation rate more faster and stable.
6. The use of TFT color LCD makes the screen display more
remarkable.
7. Digital menu, easy operation; functions fully meet the
clinical demand.
8. Ample and user-friendly indicator information; accurate and
complete alarm information to ensure safe injection.
9 Aluminum alloy base, integrative pump device makes more smooth
operation and easier installation and maintenance. |
|